GE'S MIC 10
The MIC 10 Series of portable hardness testers that weigh less than 11 ounces
Operates on 2 standard "AA" batteries
Operation based on the UCI Principle
Test in any direction.
A selection of interchangeable probes are available having loads from .1 to 10.0 kgf, to vary the indentation size from one that can not be visually detected to a larger indentation required for testing coarse grain materials.
Advanced Instrument Features:
Scales HRC, HRB, HB, HV and Tensile Strength with MIC-2010 probe only
A single key press toggles between display of average or single values
Easy to read backlighted LCD display
HI/LO alarms
Microdur Probe Models and Styles:
Ten Probe models in four styles and with loads from .1 kgf to 10 kgf are available.
Calibration parameters specific for each probe are stored internally.
This allows the operator to freely interchange probes with the instrument.
|
Model |
Load |
Style |
Major Diameter |
Total height with connector |
|
MIC-2010 |
10 kgf |
Standard |
.75" |
6.4" |
|
MIC-205L |
5 kgf |
Extended |
.75" |
7.5" |
|
MIC-205S |
5 kgf |
Shortened |
.75" |
3.5" |
|
MIC-211 |
.8 kgf |
Motor |
1.52" |
8.6" |
MIC 10’s are no longer available for purchase, however we still have availability within our rental fleet, please contact us for rates
If you require an alternative hardness tester please click here
Download files
