| |
| ULTRASONIC
- THICKNESS METERS |
| KRAUTKRAMER
DMS2 |
|
| DESCRIPTION |
|
LCD
wall thickness meter with large screen, A-scan. B-scan, Stores
150,00 readings, Single & twin Probes for precision/corrosion.
Automatic probe zero, Through coating measurement modes: 0.2
- 630 mm Measurement range, Ideal for use on powerstations and
petrochemical plants. Complete with: Operatingmanual UltraMATE
Lite, Thickness data transfer, Storage and documentation, CD
Rom, Batteries, Rubber instrument case, carrying case, Firmware
upgrade CD-Rom, Calibration block, Calibration certificate.
> NOTE: PROBE NOT INCLUDED. < |
|
| KRAUTKRAMER
DM4 |
|
A
general wall thickness meter with backlight, Minimum capture
mode, manual and auto gain, dual multi-mode for measurements
through coating, LED alarm if limit value is exceeded/not reached.
Complete with Operating manual, Batteries, Calibration block,
Carry case, Calibration Certification.
> NOTE: PROBE NOT INCLUDED. < |
|
| STRESSTEL
T-MIKE P |
|
|
Programmable
digital wall thickness meter with back light, factory preset
to steel or customer material specification. Reprogramming can
be done by connecting to STRESSTEL T-MIKE E or computer. Complete
with Operating manual, Dual element transducer and cable, Batteries,
RS232 cable and velocity programming, Ultrasonic couplant, Carry
case, Calibration block, Calibration certification. |
|
| STRESSTEL
T-MIKE E |
|
Digital
wall thickness meter for measurement of various materials
with back light, Amber colour display, Automatic calibration
with auto probe zero. Measureing range 0.025 to 19.999 inches.
Complete with Operating manual, Dual element transducer and
cable, Batteries, Ultrasonic couplant, Carry case, Calibration
block, Calibration certification.
|
|
| BAUGH
& WEEDON AUDIT 105 |
|
Pre-calibrated
for mild steel. Complete with 2off 'AA' batteries, operating
handbook, DT25 probe with integral lead (range 1.5mm to
99.9mm in steel), 25ml couplant, Plastic transit case.
|
|
| BAUGH
& WEEDON AUDIT 106 |
|
Pre-programmed
for 10 commonly encountered engineering materials, i.e:
mild steel, stainless steel, aluminium, copper etc.. Complete
with 2off 'AA' batteries, operating handbook, DT25 probe
with integral lead (range 1.5mm to 99.9mm in steel), Plastic
transit case.
|
|
| BAUGH
& WEEDON AUDIT 107 |
|
Fully
calibrateable, designed for customers who have to inspect
a wide variety of materials. Complete with DT25, 5MHz
probe with integral probe lead (range 1.2mm to 200 mm
in steel). 2 'AA' batteries, 125 ml Ultrasonic couplant,
Operators handbook, Moulded plastic transit case.
|
|
| CYGNUS
1 BASIC |
|
Measures
between 1.0mm and 99.9mm. Complete with heavy duty probe
(2.25MHz, 13mm°), Battery case, Battery, Calibration
trim tool, Spare 'O' ring set, thread protector, 15mm
test block, Carry case, Operation manual.
|
|
| CYGNUS
1 I.S |
|
Intrinsically
safe, Measures betwen 1.0mm to 99.9mm, Complete with
Heavy duty probe (2.25 MHz, 13mm°), Intrinsically
safe rechargeable battery, mains charger, Callibration
trimtool, Spare 'O' ring set, Thread protector, 15mm
Test block, Leather case and pouch, Operation manual.
|
|
| CYGNUS
2 |
|
Allows
measurement up to 199.9mm. Complete with 2.25 MHz, 13mm°,
remote probe, Calibration trim tool, 15mm test block,
Leather case and pouch, Operation manual.
|
|
| SONATEST
STEEL GAGE |
|
Pre-calibrated
for mild steel. Supplied in a polypropelene carrying
case. Complete with Battery pack, Charger, Operation
Manual, Probe type: SG15, Twin probe lead (mini Lemo/Subvis).
|
|
| SONATEST
SONAGAGE II |
|
A
low cost thickness gauge with advanced features: Variable
velocity from 500-10,000 m/s. Resolution is 0.01mm (0.001"),
Inch/MM button. Supplied in plastic carry case. Complete
with 5MHz transducer type SG1 (integral lead), operator
manual, batteries, Certificaton.
|
|
| SONATEST
ALPHAGAGE A_SCAN |
|
A-Scan
corrosion monitor with data logging facilities, Storage
up to 8000 thickness readings. Compatible with any standard
flaw detection probe. Complete with battery pack, CH6000
charger and mains cable, Calibration certificate, Operation
manual.
|
|
| SONATEST
T-GAGE IV |
|
|
A
robust hand held thickness gauge with LCD display. Calibrateable
to a variety of different materials, backlight. Measures from
0.63 to 500mm. Resolution 0.01mm. Velocity: 1250-10,000 m/s.
Complete with 5MHz transducer type TG1 (integral lead), operating
manual, plastic carry case, couplant, batteries, certification,
5 years warranty.
|
|
| SONATEST
T-GAGE IV DL |
|
|
As
T-Gage IV bit includes alarm mode, differential mode, high
speed scanning, RS232 output and data send options. Internal
data logger, which stores 1000 readings, file transfer software
and cable. It also indicates when reading is not logged. Complete
with 5MHz transducer type TG1 9integral lead), operators manual,
plastic carry case, couplant, batteries, software and data
cable, certification, 5 years warranty.
|
|
| SONATEST
T-GAGE IV MM |
|
|
Features
LCD display, fast scan, alarm (audible & visible), data
loggingn, together with multi-mode feature used for reading
through and eliminating the thickness of paint and coatings
on various materials.
Measuring range in pulse echo mode: 0.63-500mm. Echo-echo
mode (through paint & coatings): 2.54-25.4mm. Resolution:
0.01. Velocity range: 1,250-10,000 m/s. Complete with 5MHz
transducer, operators manual, plastic carry case, couplant,
batteries, certification, 5 years warranty.
|
|
|
| copywright
©:Sercal NDT Ltd. MMVIII All trade marks & registrations acknowledged.
No parts of this site may be used without prior permission