Compression

SLP RANGE 0° Single Crystal/Ceramic FacedSLP Probe

  • High damped, low profile, 0 Degree transducers of high specification.
  • Knurled stainless steel case designed to facilitate entry into areas inaccessible to larger single longitudinal transducers
  • Low noise, lead metaniobate elements provide excellent near and far surface resolution with optimum gain.
  • Ceramic-faced with thick-walled stainless steel case for extended wear life and dependability.
CodeFrequencyCrystal Size 
SLP 1-201.25MHz20mm Dia.
SLP 1-20 -
SLP 2-102.25MHz10mm Dia.
SLP 2-10 -
SLP 2-202.25MHz20mm Dia.
SLP 2-20 -
SLP 2-252.25MHz25mm Dia.
SLP 2-25 -
SLP 5-55MHz5mm Dia.
SLP 5-5 -
SLP 5-105MHz10mm Dia.
SLP 5-10 -
SLP 5-205MHz20mm Dia.
SLP 5-20 -
SLP 10-510MHz5mm Dia.
SLP 10-5 -
SLP 10-1010MHz10mm Dia.
SLP 10-10 -

SLF RANGE 0° Single Crystal/Soft Faced

Sonatest-SLF-Probe

  • Medium damped, 0 Degree transducers of high specification for use with replacement protective membranes and high temperature delay lines.
  • Replaceable protective membranes improves contact on rough surfaces and maximises transducer service life.
  • Delay line has low thermal conductivity, recommended for use on surface temperatures upto 400 degree centigrade.  Max contact time 8 seconds, immediate cooling time in cold water 10 seconds.
  • Tuned medium damped lead metaniobate providing low noise with high gain.
CodeFrequencyCrystal Size 
SLF 1-251.25MHz25mm Dia.
SLF 1-25 -
SLF 2-102.25MHz10mm Dia.
SLF 2-10 -
SLF 2-202.25MHz20mm Dia.
SLF 2-20 -
SLF 4-104MHz10mm Dia.
SLF 4-10 -
SLF 4-254MHz25mm Dia.
SLF 4-25 -
SLF 5-10
5MHz10mm Dia.
SLF 5-10 -
SLF 5-205MHz20mm Dia.
SLF 5-20 -
SLF 5-255MHz25mm Dia.
SLF 5-25 -
SLF 10-1010MHz10mm Dia.
SLF 10-10 -
SLF-Membranes (pk 10)
-Membranes
SLF Membranes 10 -

CDF RANGE 0° Twin Crystal/Soft FacedSonatest-CDF-Probe

  • Medium damped, 0 Degree, twin lead zirconate elements providing low noise with high gain.
  • Replaceable protective membrane improves contact on rough surfaces and maximises transducer service life.
  • Rugged stainless steel case, specially designed for fatigue free handling, providing firm grip and stability during hand scanning.
  • All the advantages of a combined double transducer, with increased wear resistance and longer useful life.
CodeFrequencyCrystal Size 
*Additional Probe Diameters are available.
CDF 1-251.25MHz25mm Dia.
CDF 1-25 -
CDF 2-102.25MHz10mm Dia.
CDF 2-10 -
CDF 2-202.25MHz20mm Dia.
CDF 2-20 -
CDF 5-105MHz10mm Dia.
CDF 5-10 -
CDF 5-205MHz20mm Dia.
CDF 5-20 -
CDF-Membranes (10 pk)Membranes
CDF Membranes 10 -

CD RANGE 0° Twin Crystal/Perspex FacedSonatest-CD-Probe

  • Medium damped, 0 Degree, lead zirconate elements.
  • Stainless steel case for durability.
  • Perspex shoe allows shaping for curvature.
  • Economical transducers for general purpose use.

CodeFrequencyCrystal Size 
CD 1-151.25MHz15mm Dia.
CD 1-15 -
CD 1-201.25MHz20mm Dia.
CD 1-20 -
CD 2-102.25MHz2x8x4mm
CD 2-10 -
CD 2-152.25MHz2x13x5mm
CD 2-15 -
CD 2-202.25MHz2x17x6mm
CD 2-20 -
CD 5-105MHz2x8x4mm
CD 5-10 -
CD 5-155MHz2x13x5mm
CD 5-15 -
CD 5-205MHz20mm Dia.
CD 5-20 -

High Temperature

CodeFrequencyCrystal Size 
CD 2-10HT2.25MHz2x8x4mm
CD 2-10HT -
CD 4-10HT4MHz2x8x4mm
CD 4-10HT -
CD 5-10HT5MHz2x8x4mm
CD 5-10HT -
CD 5-15HT5MHz2x13x5mm
CD 5-15HT -

GEMINI RANGE – (Bell Shaped) 0° Twin Crystal/Plexiglass FaceSonatest-GEM-Probes

  • Housed in an ergonomic case providing the user with fatigue free scanning.
  • Flat front face allows close access to corners, weld caps and changes of section thickness.
  • Suitable for use with most flaw detectors and wide band thickness meters.
  • Available in 3 frequencies 2.0MHz, 4.0MHz and 5.0MHz.
  • Optional wear ring to increase useful life.
CodeFrequencyCrystal Size 
GEM 2-102MHz10mm Dia.
GEM 2-10 -
GEM 5-105MHz10mm Dia.
GEM 5-10 -

D RANGE 0° Twin Crystal/Perspex Face Sonatest-D-Probe

  • Medium damped, 0 degree, elements provide low noise and high gain.
  • Stainless Steel fingertip case with knurled grip.
  • Side entry sheath to minimise integral cable damage.
  • Acrylic shoes allow for shaping to curvatures.
CodeFrequencyCrystal Size 
D 2-102.25MHz10mm Dia.
D 2-10 -
D 5-55MHz5mm Dia.
D 5-5 -
D 5-105 MHz10mm Dia.
D 5-10 -

SLC RANGE – 0° Single Crystal/Ceramic Face Sonatest-SLC-Probe

  • Low damped, 0 degree transducer with ceramic wearface for general purpose use.
  • Knurled stainless steel case designed to provide grip and reliability for continuous scanning.
  • Low damped, lead zirconate elements to provide high gain for maximum penetration.
  • Excellent value for money transducers providing high wear resistance.
CodeFrequencyCrystal Size 
SLC 1-201MHz20mm Dia.
SLC 1-20 -
SLC 2-102MHz10mm Dia.
SLC 2-10 -
SLC 2-152MHz15mm Dia.
SLC 2-15 -
SLC 2-202MHz20mm Dia.
SLC 2-20 -
SLC 2-252MHz25mm Dia.
SLC 2-25 -
SLC 4-104MHz10mm Dia.
SLC 4-10 -
SLC 4-154MHz15mm Dia.
SLC 4-15 -
SLC 4-204MHz20mm Dia.
SLC 4-20 -
SLC 5-105MHz10mm Dia.
SLC 5-10 -

SLH RANGE – 0° Single Crystal/High Damped/Ceramic Face Sonatest-SLH-Probe

  • High damped, low noise, 0 degree, short pulse, lead metaniobate element providing superior resolution with optimum gain.
  • Rugged stainless steel case designed for fatigue free handling, with good grip and stability.
  • Ceramic wear face and hardened steel wear ring to maximise transducer service life.
  • A regular standard transducer used for testing small to large components of different materials and geometries.
CodeFrequencyCrystal Size 
SLH 1-251.25MHz25mm Dia.
SLH 1-25 -
SLH 2-102.25MHz10mm Dia.
SLH 2-10 -
SLH 2-152.25MHz15mm Dia.
SLH 2-15 -
SLH 2-202.25MHz20mm Dia.
SLH 2-20 -
SLH 2-252.25MHz25mm Dia.
SLH 2-25 -
SLH 5-105MHz10mm Dia.
SLH 5-10 -
SLH 5-155MHz15mm Dia.
SLH 5-15 -
SLH 5-205MHz20mm Dia.
SLH 5-20 -
SLH 5-255MHz25mm Dia.
SLH 5-25 -
SLH 10-1010MHz10mm Dia.
SLH 10-10 -

SLM RANGE – 0° Single Crystal/Medium Damped/Ceramic FaceSonatest-SLM-Probe

  • Medium damped, low noise, 0 degree, medium pulse width, lead metaniobate element with high gain.
  • Tuned to optimise sensitivity, penetratiion and resolution.
  • Robust stainless steel case designed for fatigue free handling with stability during hand scanning.
  • Ceramic wear face and hardened steel wear ring to maximise transducer service life.
CodeFrequencyCrystal Size 
SLM 1-251.25MHz25mm Dia.
SLM 1-25 -
SLM 2-102.25MHz10mm Dia.
SLM 2-10 -
SLM 2-152.25MHz15mm Dia.
SLM 2-15 -
SLM 2-202.25MHz20mm Dia.
SLM 2-20 -
SLM 2-252.25MHz25mm Dia.
SLM 2-25 -
SLM 4-104MHz10mm Dia.
SLM 4-10 -
SLM 5-105MHz10mm Dia.
SLM 5-10 -
SLM 5-155MHz15mm Dia.
SLM 5-15 -
SLM 5-205MHz20mm Dia.
SLM 5-20 -
SLM 5-255MHz25mm Dia.
SLM 5-25 -
SLM 10-1010MHz10mm Dia.
SLM 10-10 -

Sonatest-wear-rings

Wear Rings -

WEAR RINGS

Wear Rings available to fit CD and TMP4 ranges.